NEW! Professional Microwave Kiln Fusing Glass Melting DIY Glass Jewelry

Description

Product Description
Product description
Including 1 Small Microwave Kiln, 1 bag(10pcs/bag) kiln paper
Large microwave kiln outter size: 4.72*3.26 inch (12*8.3cm),inner size: 3.15*1.77 inch (8*4.5cm),weight:1.1 lb (0.5kg), Material: Ceramic fiber
Microwave kiln is a new type of high temperature oven for glass melting or softening and it is popular in Europe and the United States areas.It can reach to 900°C (1650 °F) when operating.For heating about 5 minutes,small pieces of glass will be heated to soften shape and glass reprocessing completes.It is compact,safe,convenient,energy saving,environmental proctection and high efficiency.It is a good tools for lampwork glass art processing.
Microwave kiln material for high temperature heat-resistant fiber, although the maximum temperature inside the kiln up to 900°C (1650 °F), but the surface temperature is only about 70°C, as long as the operation properly there will be no danger
As long as a set of microwave kiln sets and a home microwave oven, you can become jewelry designer. Simple operation, just 6 minutes to complete a work of art. Small and compact, safe, environmentally friendly, energy saving and convenient
Notices before use:
1. Use of microwave kiln must be padded kiln paper, otherwise the glass will stick on the kiln tray. Replace each time using new kiln paper.
2. If the microwave kiln is wet, the kiln paper is black and yellow instead of white. So the microwave kiln storage to be moisture-proof treatment.
3. Do not put the hot microwave kiln on the microwave oven, wood products, plastic cooling.
4. Do not open the microwave kiln when cooling, cold air instantly into the microwave kiln high heat environment, will cause damage to the microwave kiln.
Instructions:
1, Using a larger size microwave oven.Microwave should be at least 1000 watts for best results.
2, Clean ready glass and kiln tray.
3, Kiln paper cut larger than glass pieces,put it on top of the kiln tray.
4, Place kiln tray into the microwave oven.Cover the kiln lid and set the microwave temperature as "HIGH",heating around 6-8 minutes.
5, The hole in the top glows orange when the kiln is at fusing temperatures.
6, Carefully remove the kiln wearing insulated gloves to kiln shelf for cooling about 30 minutes when firing is complete.
7, It may take a few attempts to figure out the ideal firing times,usually between 6 to 16 minutes.
8, Use tools like files to round the melted semi-finished material and a strong adhesive to bond accessories to it, and you will customize a unique pendant only belongs to you in the world!
About Us
powered by